Installed AC Commander Kit, Now Fixed

Until you ID it and set the feature code, it may not do anything. Not even an indicator blink.
Could be as simple as the light is not working.
Try it on a conventional loop if you have one.

And believe it or not, my command engines will not run in conventional upstairs on my still set up Christmas loop. ( I know, at least I took the tree down)if my Command base is still on downstairs in the basement.
Good luck.

Nevermind, i messed up a wire combination, now i've fixed it and its running great!

Whenever I install something new, I always double check the wiring before powering it up. The extra time it takes is always less than the time it takes to figure out why the darn thing doesn't work.

Thanks RoyBoy, I did check what I thought was right, and also checked the manuel.  I eventually saw that I had the ground wire in the wrong place, I put it where it was supposed to go and everything runs great now!

How about editing the title of this post to include the words "Now Fixed" or "Now OK"

That would remove the negative tone and give the reader a reason to read what you did to fix the problem. Just a thought - glad it's working and you solved the problem.

jackson