MTH DCS loader Error

I have run into this before. It's a weird issue with the time of day you are running these updates. Reset your computer clock to some other time like 5:00 pm.  I don't why the DCS loader does this but I also notice this issue when working late around midnight hours.

H1000

Thank you for that information.

I did not think about the actual time of day.

Never ran into a clock issue?  Seems odd.  The load can malfunction depending on power source and occassional board issues.  A load can actually corrupt the firmware causing the board to lock out.  Only a factory loader that loads through pins can restore the firmware.  Something MTH Service would do.

Recommend you let it sit a day, and then go back and try a reload again.  Since this is PS-32 in a Steam engine, you left the flash code alone correct?  You should only load the sound file.  Leave in or use a specific PS-32 steam flash code.  Never load normal PS-3 flash codes into PS-32 boards.  G

Hello

I tried to load the sound file this morning and the program worked properly.  However, I am back to the original problem that none of the sound files seem to be right. I have tried most of them from the web page. The whistle does not work properly (starts & stops abruptly) and there is no chuff sound. It actually sounded better while testing the installation  (before I loaded the files).  I still seem to be missing something. This is my first attempt at loading sound files, so any help would be appreciated.

Hard to say, you might have board issue or your engine wiring is at fault.  I load boards separately with the test set which at least lets me know it functions first with the load.  G