Skip to main content

Hello all ...  Daylight were and are popular models to run and build .  Lobaugh built and ran a Daylight on the SP layout at the SF fair or 1939 .  Postwar  (1947-50) at least 3 models of the GS4 were running on layouts on the west coast . This example has Lobaugh drive and drivers, cast frame , heavy brass boiler , and cast shroud ... some miss guided soul replaced the open frame motor with a can ......found in a Bay Area collection dating back to the late 40's / early 50's.     Engine is big ...but not quite 17/64ths .... here pulling Exacta cars ...which are 17/64ths ...appearing big for the engine ...  the last photo shows a Bill Johnson SP coach from the early 50's ..in 1/4" ...which looks like a better marriage . 

The Exacta cars are molded copper .... available in 1/4" and 17/64ths..  from late 40s' ..paint job on cars ..gets an E for effort ... .....   will  be searching for more Johnson cars for the engine to pull ...

Northern's are none too happy with  my 48" radius .... but run ..even if pushing the limit of tight turns 

 

 

 

 

 

 

071219234807121923490712192353a_HDR0712192355_HDRad 1947MR 1952 

Attachments

Images (6)
  • 0712192348
  • 0712192349
  • 0712192353a_HDR
  • 0712192355_HDR
  • ad 1947
  • MR 1952
Videos (1)
0712192344[1]
Original Post

Replies sorted oldest to newest

Ok, Ill bite, why do you say some misguided soul replaced the open frame motor with a can," This example has Lobaugh drive and drivers, cast frame , heavy brass boiler , and cast shroud ... some miss guided soul replaced the open frame motor with a can ......found in a Bay Area" I can see open frame for nostalgic purposes but don't heavy duty can motors give superior slow speed performance over an open frame motor?

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×