I just set up A GW 180n power to my Cab 2 control It works great running conventional Tmcc engines and Legacy engines?
Original Post
Replies sorted oldest to newest
Have satisfactorily used that setup with a Legacy PowerMaster.
I meant to say how do I set up gw 180 to rub tmcc and legacy engines?
Just connect the transformer directly to the track. You just have to run one wire from the track terminal on the Legacy base to the outside rail of the track. That connection can be anywhere from the transformer on, anywhere with continuity to the outside rail is fine.
This diagram from the Legacy command system manual is all the connections you need. the GT-180 connects the same as the ZW in the picture, it just powers the track like your running conventional mode.
