Skip to main content

As to the 4501 MTH tenders being too small,4501's original tender was smaller and the green MTH version reminds me of that.It was around 1973 that 4501 got her current larger tender that was from a scrapped Central of Georgia 2-10-2. Hopefully MTH will recognize this and do the silver smoke box version like she had with the smaller tender.. https://www.flickr.com/photos/lionelkid18/6091446685

Originally Posted by ROGERW:

PRRronbh, Maybe if we write MTH, they may make changes to the Southern E-8 that will make it current to the actual Southern E-8 that's at the NCTM in Spencer NC..............rogerw.

Roger, have sent an email to one of the VPs.  But the more the merrier and better chance they might listen.  At would be nice to have #6900 as a contemporary engine.  That is what would make me pull the tiger on a purchase.  We can add roof tanks ourselves.

 

Ron

 

 

 

Last edited by PRRronbh

To follow on Dave's conversation with MTH about rooftop air tanks, I spoke with the 3rd Rail representative on Thursday (sorry, I misplaced the index card where I wrote his name).  He said their Southern E-8 would have the air tanks.  Glad I ordered one to help that cause.  He thought they would arrive in late 2016.   Cheers - Bryan

Originally Posted by Johnny Winkler:

As to the 4501 MTH tenders being too small,4501's original tender was smaller and the green MTH version reminds me of that.It was around 1973 that 4501 got her current larger tender that was from a scrapped Central of Georgia 2-10-2. Hopefully MTH will recognize this and do the silver smoke box version like she had with the smaller tender.. https://www.flickr.com/photos/lionelkid18/6091446685

Considering Lionel used the silver smoke box when they did the model of 4501 back in 1992, I wouldn't be surprised if MTH did as well.

 

As far as their tenders go MTH-wise, they feel like an odd fusion of the original short tenders and the current elongated one. It's not too bad, but it would've been nice to get the current large ones. Kind of like it would've been nice that the NKP 587 one in the same catalog got the Berkshire tender like the current prototype.

 

I'm also curious if they give the 4501's scenic rail fan passenger announcements, not all too different from how they did with their rendition of Western Maryland #734.

 

Not to mention give them prototypical whistles!

Last edited by Mikado 4501
Hi Ben,,
 
Do you still have your Magellan Overland car?
 
 
Originally Posted by Ben Nance:
Originally Posted by kjstrains:
Ben
Very nice collection of Southern Steam Engines.  I like how you displayed HO versions of Southern Tennessean and PS4 in front of O'Gauge Models.  I thought about getting Weaver's Southern Tennessean for my own collection, but the prices I have seen on the bay recently have been way too high for me...$2500. 
Thanks for sharing your photos.
 
Ken
 
 

 

Thanks Ken! 

It's completely ridiculous what people on eBay try to get for the Weaver Tennessean these days. Just because once one got caught in a bidding war and went for $2000+, now everyone thinks it's overly rare. That engine should really only go for about $800. But it really is a beautiful engine and quite accurate. However I'd still like to find the two rail O scale version. 

 

 

SC Shagger, I contacted Lionel several months ago about the 18" Southern Passenger cars that are still on the shipping schedule.  They confirmed that they are not making them and being replaced by 21" Southern Passenger Cars.  They said it was a mistake on the shipping schedule.

Very nice photo of Southern Engines in front of your Christmas Tree!  I used to live in Columbia and had dinner at the station several times.  Thanks for sharing the photos!

Did anyone purchase Lionel Legacy Southern Heavy Mikado and have photos or video of it?  I believe it recently shipped to dealers. 

Mikado 4501 posted:

Tyler,

That FM looks terrific. Lovely paint and excellent detail.

 

Personally, I'm looking forward to how the new MTH Premier Southern Mikados turn out when they (reportedly) will be out next month.

I agree the FM looks very sharp!  Nice purchase, Tyler.

The MTH Southern Mikado should be interesting to see.  

Speaking about Mikados, has anyone seen or bought the New Lionel Legacy Heavy Southern Mikado?  I know it's not exactly prototypical but like to see some photos anyways.

Mikado 4501 posted:

Tyler,

That FM looks terrific. Lovely paint and excellent detail.

 

Personally, I'm looking forward to how the new MTH Premier Southern Mikados turn out when they (reportedly) will be out next month.

Me too.  Regarding the arrival time, I would not hold my breath.  I am also curious about Lionel's 630. 

kjstrains posted:
Mikado 4501 posted:

Tyler,

That FM looks terrific. Lovely paint and excellent detail.

 

Personally, I'm looking forward to how the new MTH Premier Southern Mikados turn out when they (reportedly) will be out next month.

I agree the FM looks very sharp!  Nice purchase, Tyler.

The MTH Southern Mikado should be interesting to see.  

Speaking about Mikados, has anyone seen or bought the New Lionel Legacy Heavy Southern Mikado?  I know it's not exactly prototypical but like to see some photos anyways.

Thank you, Kjstrains.  I have seen Lionel's 4866 in action, however, I did not purchase one.  It's a beautiful locomotive, but I reserved a 3rd Rail SRR E8 instead. 

The FM Train Master looks pretty good, but.  I am a bit surprised after the great job Lionel did with the Hi-Nose GP30's

that they missed a particular detail for the Souther FM Train Master.  The pilot decks were stepped down for the safety of the crews.

MTH did get this Southern detail correct.

Note different height in pilot deck of PRR at left vs. Southern at right.

 

Ron

IMG_1584IMG_2038   I  have two Southern Railway Ps-4  4-6-2 Weaver "Tennesseans" . I plan to eventually sell the one that has the T/A Studios upgrade to TMCC. The engine has the Limited Edition Certificate and has been run very little. I am certain the aged traction tires would probably last only briefly in running. I purchased this engine from "Purple Papa" at his store in Conway,S.C. near Myrtle Beach about 15 years ago. I paid $800 for the engine and about $190 for TMMC.

The engine is damaged via a partial crack in the rear of the cab roof in the bend where it turns up. An auto body friend placed epoxy in the crack and although the crack/epoxy is not obvious I had planned to repaint the roof [original flat black] but hand tremors have eliminated that. No cosmetic damage otherwise. The engine was dropped from knee high onto carpeted floor. [Eight years ago my son had it upside down in his lap oiling it and dropped it between his legs when his 3 year old raised up and cut her head on a glass table].

When ready to sell I will list on the OGR Buy/Sell Forum. Most folks probably consider T/A's upgrade obsolete although it functions perfectly from Cab 1. In addition there is likely a perceived damage discount from "elite" pricing levels mentioned on the Bay,etc.  In that regard pricing  won't be anywhere near $1,000. [but when listed on OGR 3 years ago at sub- $800 price I received zero response].

 

 

 

 

 

Attachments

Images (1)
  • IMG_2038
Last edited by Dewey Trogdon
PRRronbh posted:

The FM Train Master looks pretty good, but.  I am a bit surprised after the great job Lionel did with the Hi-Nose GP30's

that they missed a particular detail for the Souther FM Train Master.  The pilot decks were stepped down for the safety of the crews.

MTH did get this Southern detail correct.

Note different height in pilot deck of PRR at left vs. Southern at right.

 

Ron

Yes, I agree.  Lionel outdid themselves in regards to the GP30's.  I originally purchased one SRR GP-30, but I loved it so much that I purchased the other road number.

Another thing that bothers me about Lionel's SRR FM, is the absence of the bell on the front of the loco. 

Well since "LIONLMAN" did not post images of the Heavy Mikado fireman's side I will.

And also a tighter shot of the smoke box,

As a Southern fan would like a good representation of a Ms-4 Heavy Mikado.  And as we all should know the three-rail makers most probably will NOT invest 150/200K for die cast tooling for at best a few hundred sales.

My personal philosophy is not to spend $$$$ on motive power that is NOT Very, Very, Very close to prototype.  And it is Very to Very, Very close for cabin/cabooses.   As stated before Lionel did hit it out of the park with the Southern & N&W high-nose GP30s.

But this Mikado falls short.  But it could have been a contender.

First off 4866 has the more numerous Elesco water heaters on the top front of the smoke box.  Although 4866 had a Alligator guide and the split walkways as Lionel's model.

Now if Lionel would have researched they would have found that 4829 used the worthington heater, had Alligator guide and split walkway much like their model.  Also from the so so picture of 4829 I found, it appears that the worthington heater is mounted just below the walkway between the pump and cab.  So even If a Worthington heater could add as an add on, it would not look too bad.  Also the apparent add on turbine on top of the smoke-box in front of the stack should not be there but should be just in front of the cab fireman's side.

And of course the the quintessential Southern steam engine look is the slight lower than center headlight.  Also on the Lionel model the classlights should be moved more outward.  Now presuming that the smokebox front is an separate piece it could have been tooled for a modest price.

Now I for one would have been willing to pony up $100 to $150 more to make this model Very, Very + close.

 So disappointing, sure would like a Ms-4!

Ron

Last edited by PRRronbh

Another issue with Lionel's 4866 is the dynamo mounted just behind the bell. This should be located just in front of the cab.

The biggest problem with models of Southern steam is what they did at Spencer and other shops during the 1940s. As part of their rebuilding and modernizing steam locomotives, many had the walkways changed beside the smoke box, allowing easier access for the shop crews to do their work. The SRHA has documented this well in past issues of TIES magazine. You could tell the shop that serviced the locomotive by the design of the new steps and handrails. This Lionel model, even if totally correct for a Worthington Feeder locomotive, would still not by prototypically correct for the mid 1940s - early 50s era. The same modification was done to the PS-4s as well. I attached an image of the 1401 as she looks now, and notice the "high ladders" on the front. Compare to any model of Lionel or MTH and see the difference. This would have been done at Spencer shops.

Now, with some decals, detail parts and paint this can be turned into a very close model of a Ms-4, but with an $1100 cost I am not sure how many modelers would take that extra route. 

I have several good images of Southern Ms-4 locomotives at home on my laptop that I can upload if anyone wants to see the differences between model and in-service appearance.85318502.XMPJe9Mi.DSCN0512640

Attachments

Images (1)
  • 85318502.XMPJe9Mi.DSCN0512640

A friend of mine had a periodical that a gentleman wrote about the old Weed Line that ran from Alexandria Va to Harrisonburg Va.  The man worked the Weed Line and in his own words talked about his experiences.   I forget how many years he worked but it was some very interesting reading about working for the Southern Railroad.  My friend has misplaced his copy and I was wondering if anybody might have information as to where another copy could be found. 

Well a few weeks ago I ran across these images of a NS GP59 taken at a NS event at the NCTM.  Posted one on the week photo thread.  Posting all four with a story.

In 2000 I accepted a position as Quality Manager at a manufacturing plant adjacent to the NCDOT double mainline tracks through.  In fact shared office area on second floor over the QA testing lab.  We had two large picture windows overlooking that mainline only about 40-yards away.   Due to build shape only had a few degrees of view.  Was very hard not to spend time looking out.  One day recall looking out as train went by to see an Abraham M1A1 on a flat.  I tried to discipline myself not to look like I was paying too much attention to trains going by.  And one day from the corner of my eye I a green and white (imitation aluminum) engine go by.  Did not get a good look.  Asked train friends and found it was this 4610.  The Southern rides again!

Ron

Last edited by PRRronbh

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×