There were times I needed to clear the bolted on bump out fingers away from their fastened position to the main layout.
At time of construction I needed two functions. Height adjustment AND portability. So I multitasked the bottom of the legs. I used a factory dolly or built a dolly of sorts, mounted wooden coaster type cups and used Monaco levelers seated in each cup.
For a boxie, squareish platform you can use a conventional furniture dolly.
![IMG_8331 IMG_8331](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/83086529564776469/filePointer/83227312751776283/fodoid/83227312751776267/imageType/MEDIUM/inlineImage/true/IMG_8331.JPG)
For free form modules just make a frame to suit.
![IMG_8315 IMG_8315](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/83086529564776469/filePointer/83227312751776284/fodoid/83227312751776268/imageType/MEDIUM/inlineImage/true/IMG_8315.JPG)
Each leg may be fully adjustable yet portable.
![IMG_8313 IMG_8313](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/83086529564776469/filePointer/83227312751776285/fodoid/83227312751776275/imageType/MEDIUM/inlineImage/true/IMG_8313.JPG)
![IMG_8311 IMG_8311](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/83086529564776469/filePointer/83227312751776286/fodoid/83227312751776276/imageType/MEDIUM/inlineImage/true/IMG_8311.JPG)
I mount 1 1/2" sockets within the module.
![IMG_8322 IMG_8322](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/83086529564776469/filePointer/83227312751776287/fodoid/83227312751776277/imageType/MEDIUM/inlineImage/true/IMG_8322.JPG)
Sockets are just pieces of 2 x 4 material caught sleeping on the miter saw.
![IMG_8323 IMG_8323](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/83086529564776469/filePointer/83227312751776288/fodoid/83227312751776278/imageType/MEDIUM/inlineImage/true/IMG_8323.JPG)
Glue two of them together for added stability.
![IMG_8325 IMG_8325](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/83086529564776469/filePointer/83227312751776289/fodoid/83227312751776279/imageType/MEDIUM/inlineImage/true/IMG_8325.JPG)
Bore 1 1/2" holes on a drill press for plumb centerlines.
When selecting 1 1/2" dowel stock take a piece of scrap with a 1 1/2" hole bored in it to size up your purchase. You will find a slop of 1 1/2" material sizing in at +/- 1/16". You want snug or over size and hand sand to fit.
A tight 90 degree elbow makes a nice saw dust shroud. I good vac will control the mess.