I have a small area for power/control of my layout. What I want to do is mount the TIU, WifI and all my LCS components (less the CAB2 base) on the board shown in the picture. Then mount that on the back of the table. Goal is to be able to quickly/easily detach all the varous leads from the layout so i can roll the power/control cart out of the way.( From time to time I need access under the layout there and it's a pain to roll that out w/o diconnecting something or resetting the ZW handles and I want more table space. ) I will mount a power strip on the board so i can plug my ZWs and all other wall warts into it. One plug and that disconnects from the outlet. (I have a dedicated 20A line for my layout). What I would like to be able to do is connect my for power leads from each of the 2 ZW's into one connector; and connect the leads from the ASC2s, BPCs and SER2 in as few connectors as possible. I have no idea what would be the best approach. I've read about plugs that are used for trailers...??? Well, suggestions/advice needed and welcome. I did try to search the Forum but either there are no threads on this topic or I composed lame searches. I suspect the latter. Help!
Thanks.
